HANPRO-100 communication driver is the driver to communicate with Wireless controller HANPRO-100 model of HANCESS Co., Ltd. in Korea.
<Figure 1> is read setting example of HANPRO-100 communication driver.
|
|
| <Figure 1> Read setting example of HANPRO-100 communication driver |
Device part of <Figure 1> input Com Port(COM18), Baud Rate(38400), Parity Bit(0), Data Bit(8), Stop Bit(1) respectively, according to setting of controller.
HANPRO-100 communication driver’s read schedule
Read schedule setting parameters are as follows:
1) Station – Master ID = 0 ~ 99.
2) Read Command – Slave ID. ( ex) 1-1 )
Read Master ID value when Slave ID is 0.
3) Read Start Address – Don't care.
4) Save start address for Communication Server – Saving start address of Communication Server.
5) Read Size – Fixed 1.
<Table 1> is read contents and save address for each read command of
HANPRO-100 communication driver.
| Slave ID | Read Value | Save Address |
| 0 | Master ID value | Start address |
| Slave ID (1-1,1-2 ...5-5) | Slave Device status value | Start address |
| <Table 1> Read value and save address according to Slave ID setting | ||
Read schedule example)
READ, 1, 0, 0, 0, 1,
READ, 1, 1-1, 0, 1, 1,
If you click the icon
in protocol option part, you
can see the dialogue box such as <Figure 2>. you can also set read schedule by
using this part.
 |
| <Figure 2> Example of HANPRO-100 communication driver’s Option dialogue box |
You can set read schedule by using
,
,
button and listbox of <Figure
2>.
 |
| <Figure 3> Example of HANPRO-100 communication driver’s read schedule Add/Edit dialogue box |
When you click Add button or Edit button in dialogue box of <Figure 2>, dialogue box of <Figure 3> is shown.
You can change master ID, control slave device by using write settings.
Digital Write
Digital write and analog write have the same setting parameters except output value.
Analog Write
Analog write setting parameters are as follows:
1) PORT Port no. (0 ~ 255)
2) STATION Master ID = 0 ~ 99.
3) ADDRESS Save address. (Used only when changing Master ID. Success 1, Failure 0)
4) Extra1 Slave Device ID.( ex) 1-1 )
Change Master ID if Slave ID is 0.
5) Extra2 Don't care.
6) Value Slave Device control value.
Master ID number to change if Slave ID is 0.
Write example 1)
PORT : 0 STATION : 0 ADDRESS : 0000 EXTRA1 : PN EXTRA2 : 0 VALUE : 3
The setting parameter shown above is a setting example of ID of master device 1 connected to port 0 is changed to 3.
Write example 2)
PORT : 0 STATION : 0 ADDRESS : 0000 EXTRA1 : CD EXTRA2 : 0 VALUE : 1
The setting parameter shown above is a setting example of Master device 3 connected to port 0 can change the value 1 controlled (output value) of 1-1 slave device.
Connection
Connect the HANPRO-100 Master device's USB cable to the PC.
<Figure 4> is appearance of HANPRO-100 controller.
 |
| <Figure 4> Appearance of HANPRO-100 controller |